Page 1 of 1

Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 15:36
by ChrisK
Image

A hill I haven't read anything about here in the forum! Unfortunately I haven't found a more readable source ...
The post may be seen by someone who can create hills and who is interested in this location :D

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 19:24
by gtaman
Image

This picture should work at least if you open it in a new tab.

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 19:27
by jk201404
I did the basic profile. There is a lot more to be done. Feel free to complete the hill.


Download: https://www.dropbox.com/s/5qu5u8yjlh1z5 ... A.xml?dl=0

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 20:01
by BartiSkiJumper
Ironwood HS180 is being made at the moment by one of Gorisek Bros. members, but this homologation might be really helpful, thanks for that

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 20:05
by Lechoo
@BartiSkiJumper

Do you have a list of hills which are currently "under construction" by Gorisek Bros. ?

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 21:08
by BartiSkiJumper
Lechoo wrote:@BartiSkiJumper

Do you have a list of hills which are currently "under construction" by Gorisek Bros. ?
Ironwood HS180, Trondheim HS138, Oberstdorf HS106, Lahti HS100 and Ramsau HS98 - I think they should be ready in couple of days, maybe until the end of the month. We prepared profile for Titisee-Neustadt, but construction works didn't start yet. We are also still trying to create Innsbruck, but it's really hard to perfectly recreate the hill tower - we hope it will be ready before 4 Hills Tournament, we also might release a 'beta' version if it won't be ready at that time

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 21:27
by ChrisK
BartiSkiJumper wrote:Ironwood HS180 is being made at the moment by one of Gorisek Bros. members, but this homologation might be really helpful, thanks for that
Good News :D Thank you for the information!

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 21:33
by ChrisK
jk201404 wrote:I did the basic profile. There is a lot more to be done. Feel free to complete the hill.


Download: https://www.dropbox.com/s/5qu5u8yjlh1z5 ... A.xml?dl=0
Not bad, thank you!

Re: Ironwood (Copper Peak) HS180

Posted: 20 Nov 2020, 23:19
by matja
I create mod to Copperpeak HS 200 this modyfication is Copperpeak HS 180:
[link]: https://drive.google.com/file/d/14J0D27 ... sp=sharing this is beta I will creating ceramic tracks and a maybe wind screens or someting else.
Autor of original: januszJanusz99 (memberlist.php?mode=viewprofile&u=19290)