Page 1 of 1

Bug from gates

Posted: 20 Apr 2011, 15:37
by J.MIRO
I have wind 1.5. from right. I have gate 8.
Next time, i have(the same) wind, but i have gate 9!!!!!
I am having a feeling that the system of beams isn't worked out. :(

Re: Bug from gates

Posted: 20 Apr 2011, 16:04
by Jussi Koskela
In practice mode?

Re: Bug from gates

Posted: 20 Apr 2011, 16:05
by J.MIRO
Jussi Koskela wrote:In practice mode?
No, this is team competition.

Re: Bug from gates

Posted: 20 Apr 2011, 16:19
by Jussi Koskela
Then the wind was a bit different and the game chose a different gate.

Re: Bug from gates

Posted: 20 Apr 2011, 16:27
by J.MIRO
Very bit :wink:

Re: Bug from gates

Posted: 20 Apr 2011, 20:53
by bulwa11
nice :D I didnt notice that

Re: Bug from gates

Posted: 20 Apr 2011, 22:17
by Metsi
The gate height is dependent on the 'starting' wind. 'Starting' wind is the one you choose for example in practice mode. You can set it to 2.0 but during the jump it can be +/- 0.5 (or did it change in beta 2?).
That explains the differences.
Right now i'm trying to figure out how much does the wind direction affect the starting gate ;)

Re: Bug from gates

Posted: 21 Apr 2011, 08:49
by Jussi Koskela
Metsi wrote: Right now i'm trying to figure out how much does the wind direction affect the starting gate ;)
This varies hill by hill. For example in Lahti 1 m/s difference in wind means 2 gates.

Re: Bug from gates

Posted: 21 Apr 2011, 11:39
by Metsi
Jussi Koskela wrote:
Metsi wrote: Right now i'm trying to figure out how much does the wind direction affect the starting gate ;)
This varies hill by hill. For example in Lahti 1 m/s difference in wind means 2 gates.
I understand that, it logic that it changes depending on the hill size ;)
But is it the same with the direction of the wind? Does is affect the gate height the same way on small hills and the same on bigger ones? Is there a pattern e.g. 20 degrees = +/- 1 gate or something like that? ;)

Re: Bug from gates

Posted: 21 Apr 2011, 11:54
by Jussi Koskela
Only the perpendicular component of the wind is considered. I have set the coefficient for each hill experimentally. On big hills the wind affects the position of the gate more.

Re: Bug from gates

Posted: 21 Apr 2011, 12:38
by Metsi
Sorry for diggin this deeper, but i want to make sure i get it right:
If i have a 2,0 180 degree wind on Bad Mit the gate is set to 4.
If i have a 2,0 160 degree wind on Bad Mit the gate will be set to 4 even though the wind influence on the inrun speed is lowered ?

If it works that way, i wasted so much time on looking for a straight to face wind instead of finding a bit sided one?

Re: Bug from gates

Posted: 21 Apr 2011, 12:55
by Jussi Koskela
Perpendicular components:
2.0 m/s * cos(180°) = -2 m/s
2.0 m/s * cos(160°) = -1,88 m/s

In Bad Mitterndorf the coefficient is set to 3 gates per 1 m/s of wind, so both of those winds will be rounded to the same gate.

Re: Bug from gates

Posted: 21 Apr 2011, 13:09
by Metsi
Ah i get it now :) Sorry for troubling you but i had to make sure. I'm an old record hunter so it's quite important for me :)
Thanks for explaining ;)